LATEST ADDITIONS

I'm always surprised when I read a letter saying that this column helped convince a reader to invest in a good turntable and start enjoying analog. I shouldn't be, but I am. And I'm also amazed by how many such letters I see published, or receive via fax from the home office in Santa Fe, or by e-mail on CompuServe (Footnote 1). Ditto when I run into people at record and hi-fi stores who tell me the same thing.

I even meet newly converted analog devotees at the Toshiba-sponsored Home Theater seminars I've been participating in over the past year and a half. Although my name isn't used to promote these events, inevitably one or two Stereophile and/or Stereophile Guide to Home Theater readers are in attendance, and after the three-hour presentation (it is comprehensive) they come up and tell me how much they appreciate the fact that I've pushed them over the top and into the groove. That's about as good as it gets for a writer/advocate. It's clear proof that the old and new technologies can happily coexist.

A Consumer Electronics Show is always fun: You see and hear new stuff, greet old friends, and occasionally meet the disenchanted. Since this was my first Winter CES as a Stereophile writer, I was expecting more feedback than I'd previously received at shows, and I wasn't disappointed. Despite an icy shoulder or two, most of it was positive, and some of it was flattering. But one reader I ran into was genuinely pissed at me for "wasting most of an analog column" writing about...digital! He was talking about the January issue's "Analog Corner," in which I wrote about the Audio Alchemy DTI•Pro 32 and the major sonic improvements it produced with CDs. He punctuated the reading of his analog riot act with "Hey, I don't even listen to CDs!"

That was also the column where I wrote, "You think I'm a diehard? There are still audiophiles who refuse to listen to CDs, period." I think that slightly derisive comment is what really set him off. So will this column because it's also about digital—sort of—but I hope all you analog devotees will peruse it anyway, along with the digital-only readers who usually cross the street when they reach the "Analog Corner."

A few days ago I spoke with Gene Paul, the veteran mastering engineer who digitally transferred Atlantic Records' Coltrane catalog for Rhino's The Heavyweight Champion—The Complete Atlantic Recordings (Rhino R2 71984)—a superbly packaged "sessionography" on eight CDs (Footnote 1).

The set sounds outstanding for CD (I haven't heard the vinyl yet), and I wanted to know what converter Paul had used. I don't want to rain on anyone's digital parade, but he told me a stock Sony PCM-1630. No Wadia, no Apogee, no DCS, no gazillion-times oversamping, no SBM box—a stock '1630. "Why?" I asked. "Don't you hear differences among converters?" He said that he did, adding that if you want to change the sound, those devices do, but in his opinion the biggest difference is in the analog playback deck. Once you digitize the signal, he said, "the damage is done." The Coltrane masters were played back on a vintage MCI open-reel deck.

Okay, I give! Analog and vinyl reproduction do not have "infinite resolution," as I claimed here recently, but I didn't mean to be taken quite as literally as some letter-writers took me. Film doesn't have "infinite resolution" either, but compared to current commercial video tape, it does.

First, I am sad to report the murder of Ed Tobin, who I once referred to as the "Yoda" of record plating. Tobin, a veteran of more than 40 years of record manufacturing, was responsible for lacquer plating at Greg Lee Plating in Gardena, California, and oversaw the production of stampers for AudioQuest, Mobile Fidelity, Classic Records, Acoustic Sounds, Reference Recordings, DCC, and many, many other audiophile and non-audiophile labels. Arrested and charged with the crime was Tobin's stepson.

Second: VPI's "Easy Analog" turntable/built-in phono section combo, to be produced in conjunction with Clearaudio and Gold Aero, and mentioned in my Hi-Fi '95 Show report last August (p.82), turned out to be not so easy: the project has been scrapped. Also on the VPI front: the company has delayed plans to manufacture its new pickup arm with a variety of upgradeable options which would have priced it between $900 and $2300. Due to the high demand for the $2300 loaded version, that's all the company plans to produce for now. [See VPI's letter in this issue's "Manufacturers' Comment."—Ed.]

Third: Owners of VPI TNT III turntables (which include the flywheel and outboard motor) who are using the Bright Star Big Rock TNT isolation base absolutely need to get Bright Star's new Mini Rock F base for the outboard motor. It replaces the VPI-supplied metal shelf and, as reported by Steven Stone in this issue's Follow-Up, results in almost complete motor isolation. The sonic improvements (ie, lower noise floor) are not subtle.