No resonance to 5 kHz! Can't wait to hear what you think...
KUZMA Announces New SAFIR 9 Tonearm
Following 5 years of R&D Franc Kuzma today introduced his latest creation, the SAFIR 9 tonearm. The conical arm tube is fabricated from sapphire— "the first implementation of the precious stone" for this application.
According to the press release sapphire's overall rigidity and resistance to unwanted resonances are key natural properties of the material and according to Kuzma the arm "outperforms any arm tube used in any tonearm, remaining "resonant free" up to 5kHz, giving the cartridge, Kuzma avers, a true "ground".
Owing to the material's natural density the SAFIR 9 has "a considerably high effective mass." The bearing system is similar to the unique one used on the 4 Point arms: 4 sharp spikes resting against ruby cups, though Kuzma claims the ones here are a "further improvement" over the ones the 4 Point use.
The arm tube fits into a massive solid aluminum structure with brass blocks to provide an extremely inert and mechanically quiet support for the sapphire tube and the bearing spikes resulting in exceptional vibration dissipation.
Other features include a locking twin section brass counterweight and accurate azimuth adjustment in small accurate and easy to repeat increments with zero play. The tonearm fits easily into the "vast majority" of today's best turntables because it retains the "well-established" Kuzma arm base layout. VTA/SRA adjustment is via a very find treated screw within the arm base, producing accuracy and ease of repeated adjustment.
Internal wiring is a special Kondo silver alloy as a single, uninterrupted 1.5m long cable from headshell pins to high quality RCA plugs.
Kuzma will launch the SAFIR 9 at the High End 2022 exhibition in Munich May 19-22. There projected list price is 20,000 Euro. Here are the key specs:
Eff length:229mm (9")
P2S distance: 212mm
Offset angle: 23 degrees
Effective mass: 60 grams (compatible with phono cartridges of CU (compliance 25 or lower)
Overall mass (weight): 1250 grams
This is very exciting news!
 | ||
|
||
- Log in or register to post comments
COMMENTS
Interesting materials.
Submitted by Anton D on Thu, 2022-03-17 12:27
Now we just sit back and relax and wait for someone to come along and tell us how a much cheaper arm has better specs.
It will be interesting to see how the cartridge matching goes!
I like the optical
Submitted by jazz on Thu, 2022-03-17 17:49
stealth bomber/straw mixture. Will look interesting on some turntables.
Interesting concept. If the
Submitted by MrRom92 on Thu, 2022-03-17 18:09
Interesting concept. If the sapphire is incredibly rigid and great at rejecting resonances, I’d like to see them use it to make a longer tonearm (12” minimum) with none of the usual long-arm rigidity or resonance issues. Could be a gamechanger.
Chemisrty/mineral question...
Submitted by Anton D on Thu, 2022-03-17 18:27
What makes this 'sapphire?'
How would this differ from a ruby or aluminum oxide?
I think I know the answer, but would greatly appreciate a more physical science minded informed opinion.
I forgot the 'precious stone' part.
Submitted by Anton D on Thu, 2022-03-17 18:29
I wonder how many carats this arm is?
Did they even consider…
Submitted by Jazz listener on Thu, 2022-03-17 18:31
producing the sapphire from Hellman’s mayonnaise??? Could have brought the price down to 1/10 the cost!
How many carats?
Submitted by vince on Thu, 2022-03-17 18:48
It is 6250 carats. One carat is defined to be 5 gram.
I don't care what my next tonearm is made of
Submitted by Tom L on Thu, 2022-03-17 21:35
as long as it looks like a Klingon Bird of Prey.
It SOOO does!
Submitted by Glotz on Fri, 2022-03-18 06:35
Good call man! The headshell with the rest of the design... totally!
I still need a portable cd player shaped like the USS Enterprise...
Compatibility concerns.
Submitted by Alastair McClean on Fri, 2022-03-18 12:38
“ 60 grams (compatible with phono cartridges of CU (compliance 25 or lower)”. Shurely shome mushtake? According to the resonance calculator I use (http://www.resfreq.com/resonancecalculator.html) in this arm a cartridge weighing,like Kuzma’s own cartridges,17 grams with a compliance of a low 8cu will produce a fundamental resonance at a distinctly borderline 6.4 hz. Between 8-12 hz is optimum. A cartridge like the Lyras weighing 12 grams with a compliance of 12cu will have a fundamental resonance of 5.4 hz. A 10 gram cartridge with a compliance of 20 cu produces a fundamental resonance of 4.2 he. All these resonance frequencies are too low and likely to result in instability in the. Or am I missing something?
I have a SAT LM09 which has an effective mass of 23 grams I believe and I had instability issues with a Transfiguration Proteus and a Lyra Kleos. So it is a real world problem.
While the proof is in the putting...
Submitted by WallyTools - WA... on Fri, 2022-03-18 12:57
...I am not concerned with "unacceptably low" resonance figures on ultra rigid arms like this one. This is particularly true if you use vacuum hold down or use peripheral clamps or even SME-style clamping mechanisms to keep the record flat against the platter. It is also assumed that your records have a reasonably concentric spindle hole (if a record isn't concentric, there is an easy and cheap way to fix that!). Wonderful turntable isolation that has resonant frequency well below 5Hz will be important as well. If these conditions are met, I think this arm (based on technical merits available so far) just might be the finest sounding arm today. Again, the proof is in the putting!
Personally, I can't wait to try one out!
The proof of the pudding IS in the eating
Submitted by Alastair McClean on Fri, 2022-03-18 13:46
I agree suck it and see but it is a valid technical concern. And I know a Transfiguration Proteus with if I recall correctly a 16cu compliance was fundamentally unstable on my 23 gram effective mass and ultra rigid SAT LM09 on a clamp equipped SME 30/2. No problems experienced with a Kuzma CAR 50,Ortofon A95 and SPU Royal N all of which are sub 10cu compliance. ThE SAT is nearly a third the effective mass of the SAFIR. This is my experience so it would be legitimate for me to be concerned about this arms POTENTIALLY limited compatibility with anything other than very high mass and low compliance cartridges.
I like Ry's version (Yer O's? Yer no)
Submitted by jkingtut on Wed, 2022-03-23 18:14
A little man walked up and down,
He found an eating place in town,
He read the menu through and through,
To see what fifteen cents could do.
One meatball, one meatball,
He could afford but one meatball.
Sapphire Arm
Submitted by Howard on Fri, 2022-03-25 11:47
Dear god in heaven, does this mean that my 14" 4 point is not worthless and Ill have to pony up thousands more just to stay 'cool"? I cant take the stress, goodbye kruel world.
Call the suicide hotline
Submitted by Atom man on Tue, 2023-06-06 18:05
Wait - don't commit hari-kari yet. That thing looks like something I could put together with a PVC pipe from Lowes, Ace Hardware, or Home Depot. Some more plastic and a Dremel rotary tool could seal the deal. I'll have to think about the suspension. Ha ha ha!
How do you delete these damn things?
Submitted by Atom man on Tue, 2023-06-06 18:07
There does not appear to be a delete feature.
Call the suicide hotline
Submitted by Atom man on Tue, 2023-06-06 18:06
Wait - don't commit hari-kari yet. That thing looks like something I could put together with a PVC pipe from Lowes, Ace Hardware, or Home Depot. Some more plastic and a Dremel rotary tool could seal the deal. I'll have to think about the suspension. Ha ha ha!
Plastic can be very rigid you know!
Submitted by Atom man on Tue, 2023-06-06 18:16
Makes me wonder about DIY options. I took a counterweight to a gunsmith once who used a drill press to drill 4 holes in the back of it so I could use a Supex 6 gram headshell without lead plates to replace a 13.5 gram Marantz shell. Linda Ronstadt immediately lost the sinus condition last heard with the Shure M95ED cartridge. Some of these tweaks work but some of the no nothings at that Audio Science Review Forum will not hear of it.
An automatic vortex can
Submitted by rajal on Wed, 2023-11-29 01:30
An automatic vortex can replace the 13.5-gram Marantz case. Another way when i start drift boss
Hyper Tough
Submitted by yirtr544 on Sun, 2024-07-28 21:40
Hyper Tough's combination of affordability, durability, ease of use, product variety, and supportive customer service makes it a compelling choice for individuals seeking reliable and cost-effective tools and equipment https://hypertoughinfo.com/hyper-tough-grinder-parts-and-essential-acces....
The introduction of Franc
Submitted by Sherlock332 on Sat, 2024-10-19 11:04
The introduction of Franc Kuzma’s SAFIR 9 tonearm, crafted from sapphire, represents a groundbreaking innovation in high-end audio equipment. Its unique design, featuring improved bearing systems and superior vibration dissipation, sets it apart in the world of tonearms. Much like how checking the Sonic allergen menu is essential for those with dietary restrictions when enjoying Sonic Drive-In's delicious items, such as their classic hot dogs and onion rings, the SAFIR 9 tonearm offers meticulous attention to detail, ensuring an exceptional and resonant-free audio experience for audiophiles.
Construction
Submitted by mackecooper on Wed, 2024-11-27 01:57
A construction estimating services company specializes in providing accurate cost assessments for construction projects. These companies help contractors, architects, and property developers by preparing detailed estimates for labor, materials, equipment, and other project expenses. https://accurateestimates.us/
Personally, I think that it
Submitted by monkawisreal on Mon, 2024-12-23 07:34
Personally, I think that it is better to play online slot machines on a quality and reliable site, and that's why I play slot machines at Rhino Casino , because this site has all the quality slot machines that you can play easily and freely. I am very satisfied with the use of this site and I am happy to recommend it to you.
|
Equipment Reviews | |
The Gruvy Awards | |
Blogs Analog Tips | Columns Music | |
Show Reports | |
News Resources |
© 2024 AnalogPlanetAVTech Media Americas Inc.
All rights reserved