Pure Vinyl LP recording & editing software Page 2

Before you do anything, go into Pure Vinyl's Preferences, where you'll be presented with the first set of maddening choices, some of them incomprehensible to all but the most technically informed. Most important is "Apply vinyl correction curve." The recording itself will be "flat." In other words, the input is to be recorded unaltered, whether with or without EQ. You are selecting the output for both monitoring and playback. Here you can choose from among 66 different curves, for both 78rpm and LP playback.

If you record an equalized signal from your standard phono preamp, be sure to deselect "Apply vinyl correction curve"; if you don't, you'll get way too much bass when you monitor or play back the recording—as I found out by blowing two midrange power resistors in my Wilson MAXX 3 speakers. If you don't select "Apply vinyl correction curve" and record or play an unequalized source, of course it will sound thin and bright. You can also select a digital rumble filter, and choose the cutoff frequency and even the rolloff slope. In Preferences you can choose everything except what you're having for dinner that evening—and there might even be a checkbox for that that I didn't see.

To record an LP, click on the virtual spindle. A window appears where you fill in the artist name, the album title, and the label. Like most computer programs, Pure Vinyl is friendlier to pop than to classical music—there are no fields for composer, conductor, orchestra, etc. You choose where you want the recorded files stored, and the format: AIFF uncompressed, Apple Lossless, and two others that are not defined with that menu.

Hit the Record button and a window opens that says, "Ready to record side 1, waiting for Audio Trigger." You'll see the album title and artist on the virtual label's side 1. Make sure no music is playing at this point, or it will record and the trigger function will probably need to be reset. You can now lower the stylus, even in the next room; the program won't start recording until it senses the impulse of the stylus hitting the record surface. You can monitor from the soundcard output or from the phono preamp itself. When the side has finished, select Lock, turn the record over, lift the stylus to actuate the trigger function, and repeat. For a two-LP, four-sided 45rpm edition, repeat two more times. The maximum recording time for a 24-bit AIFF file sampled at 192kHz is a bit over an hour, but recordings using the CAF losslessly compressed and SD2 formats can be any length (limited only by the size of the hard disk).

When you're finished, hit Cancel/Stop Recording and you're done. A folder containing the recording will appear wherever you originally selected it to be stored. For convenience's sake, I chose the desktop. To play it, just drag the file into the turntable window.

Cool Stuff
Here's where the cool stuff starts. To indicate that a file is being recorded, a virtual tangential-tracking cutting stylus appears and begins to cut a virtual groove in the virtual blank lacquer. At the end of the "side" it automatically flips over the virtual disc and starts cutting a groove in the other side. Next time you drag and drop the file into the program, the image of the record will instantly appear, ready for playback. While the program is open, you can instantly drag and drop any rendered recording and it will instantly play, displacing the previous one being played.

Once the recording has been rendered, you lower the virtual stylus with your mouse and the record spins and plays. At any time you can drag the stylus and play the virtual LP at any point along the virtual groove, or you can lift and move the virtual tonearm as you would a conventional one. Of course, the 24/192 file is unedited—if you left the stylus in the runout groove of the actual LP at the end of a side, you'll hear the repeated click on playback.

Convenience
With the release of Pure Vinyl 3.0, you'll be able to edit hi-rez files. For now, however, if you want to split an LP side into separate tracks, you have to create a lower-resolution file to edit in the Pure Vinyl editor. (You'll want to do so anyway if you want to create a 16/44.1k CD or a 24/96 file for your music server.) The editor allows you to monitor "overs" (where the A/D converter has clipped) so you can drop levels, or normalize the file and raise levels if the recorded level is too low.

There's a learning curve to the editing process, but it works by grabbing and spinning the virtual record until you get near the side "in" and "out" points. Then you can use the keyboard arrows to fine-tune these points. The program automatically sets track breaks, but if they're not quite in the right places, they're easy to fine-tune—they're marked in blue on the virtual tangential tonearm. Once you're done, you can drag the playlist to iTunes to play, and/or burn it to a CD-R.

Pure Vinyl includes more features and options than I have room to go into here. Some of its option-crammed windows closely resemble a completed Federal tax return. Depending on your level of comfort with computers, you're sure to get lost in the digital labyrinth more than a few times, so it's best to read the instructions before venturing too far. Even with frequent phone calls to Rob Robinson, I ran into frustrating problems. However, I suspect they'll be fixed in v.3.0. Of course, that doesn't mean that the manual will be fixed. Ideally, I'd like a straight path through Pure Vinyl's basic functionality, followed by a second walkthrough explaining the advanced features.

Comfort Levels
Before getting into how Pure Vinyl sounded, a warning: computers can often emit speaker-damaging transients, pulses, and noises. Whenever you've got your computer hooked up to a high-powered audio system, proceed cautiously—and keep the volume down until everything's running smoothly. I ran into numerous glitches, mysterious malfunctions, crashes, sudden losses of sound, and other problems, some of which sent serious spikes through my system—like the time I accidentally routed through the soundcard and into my system the computer's internal noises (such as my e-mail program's jet-plane sound), even though I could swear I'd set it to play only through the computer's own speakers.

COMPANY INFO
Channel D
Trenton, NJ.
(609) 393-3600
ARTICLE CONTENTS

COMMENTS
Stoneholme's picture

I read this article with interest as this has been a passion of mine for several years now.  I have no issues with anything said as it's essentially what I've been doing.

I would like to share a couple of alternatives, however:

The Graham Slee Project "Jazz Club" pre-amp (www.gspaudio.co.uk) allows you to select from a variety of different equalisation curves or just pass the signal through without equalisation.  It's got pretty good performance specs as well.

Sound Studio from Felt Tip Software is a pretty versatile but easy to use program. Support is excellent and the product has never failed to perform to my expectations.  I do high-res transcription at 24-bit, 192kHz and this works a treat.

For post-processing I use wonderful suite of products from Brian Davies called ClickRepair and DeNoise.  The beauty of this product is that it is NOT a set of filters but a sophisticated yet easy-to-use digital signal processing program.  It also has built-in equalisation capability if you wish to use it.  It's also very very affordable.

For storage of the raw files I use the DroboPro.  I mention this simply because I have terabytes of raw files and although I've had some serious HDD problems, this system has not lost a "bit" of any of my recordings.

BTW, really enjoying the site although suffering from technology envy when I read about some of the systems.

Oh, although I haven't done any work in this space, I've heard great things about the OPPO BDP-95 universal optical disc player.  If you have the capability of producing DVD-Audio discs at 24-bit 192kHz, and your mates have an OPPO, it's a great way to share new music.

rl1856's picture

Not everyone owns a Mac computer....indeed approximately 90% of the computing world is non Mac and I suspect the majority of those reading this blog or Stereophile in general are PC users.  So what are the viable NON MAC alternatives for converting vinyl to digital?  For many, the use of Audacity software (free download) and ones's own internal sound card or inexpensive secondary card provides a good starting point, but what are better alternatives?

Joe Crowe's picture

I noticed that the nifty Lynx soundcard mentioned (rally interested in that) requires an adapter to be used in a Mac.

audiot's picture

I'd love to use the Pure Music software but first I have some serious hardware upgrades to consider, mainly a new turntable and cartridge. Mine is just too old and has spent too many thousands of miles in moving vans to be viable for such a huge undertaking. But someday . . . yes!

southroad3's picture

I'm a PC user so the Pure Vinyl is of no use to me. I have been digitising analog sources for a few years now using a Denon DN F650R digital recorder which transfers onto an SD card. I then plug the card into my PC. Using Nero software I chop up the files into the individual tracks, I can also edit any unwanted noise at this stage. The process is somewhat laborious but once you get used to it you can create a digital version of your vinyl/tape etc fairly quickly. The Denon records at 24/96 so SQ is acceptable. During this time I have been upgrading my vinyl playback so I suppose I would need to go back and re-record the early transfers, but I think life is too short !

See Why Audio's picture

...not all of them are equal.

Recording from vinyl is what I do for a living so forgive me if I feel I know more about it than others... but I have also found that I know less and less when it comes to the bewildering selection of software available.
I can't enjoy the 'Pure Vinyl' experience because I am a PC user... but I have been for many years using a venerable and now quite free version of Adobe Audition 3.01

The strengths of this program are difficult to nail down but amount to a great flexibility in choice. Automation of tasks is achieved through scripting and the interface is relatively easy to learn. Frankly I don't know what I'll do if it ever becomes unusable on modern computers!

Irrespective of software, I should stress that you are always going to get better results from a better turntable/arm/cart/pre/sound card than from any software. You can get a decent rip - if that's all you need, from free software such as Audacity.
As always, there is no easy way to make a bad rip sound good in software.

gbougard's picture

I've used this gentleman's services and he is one of the best in the world
I sometimes release content that's often restored from vinyl and See Why Audio is my go to guy. What he did on Bunny Wailer's "Struggle" album is simply stellar

pessoist's picture

I shared the thought of a digital high-resolution rip.
On a very second thought:
- I waste a lot of time to create a copy, that I could use to read a book, ride a motorcycle, or bicycle, meet family and friends, travel. Recording what I listen to, while I listen to? Ok, doable.
- I record what actually has been digital information before? To save some bucks or what? To listen in a compromised environment (mobile)?
- Can I really capture all of it? All information, all emotion?
Result:
I decided to buy a second turntable instead for my second location I frequently stay and chose to listen to records I buy there, or move over. I had a good second chain of equipment already (not high high end, but good classic) that I moved there.
I listen to music and feel the emotion.

What do I rip?
CDs, because they're crap, don't age well, less well than my digital files.
Do I listen to them? Yes, in the car and on the train. (.wav)
I'll be deleting all MP3 files, soon, even the ones without a .wav copy.

Nothing against the software approach above, it's really a great idea, just not one that I consider using.

thank you.
Carlos.

biliieboy's picture

Hey guys, I just wanted to share my thoughts on the casino advertising website. I stumbled upon it recently and I have to say, it's pretty cool. There are so many different casinos to choose from and they all have their own unique features. Plus, the website [url=thunderbolt-casino.online]https://thunderbolt-casino.online/[/url] makes it really easy to compare them and find the one that's right for you. I also love that they have a section for user reviews, so I can see what other people think before I make a decision. Overall, I think this is a great resource for anyone who loves to gamble online.

chatgptfrancais's picture

The ability to record directly to hard drive at high resolution is intriguing. Would love to see how ChatGPT could imagine different ways to use this software beyond just archiving vinyl.

X