Say Hello to My "Little Fwend" Automatic Tone Arm Lifter

Automatic tone arm lifters have been around for as long as there have been manual tone arms. Ortofon, Audio-Technica and many others manufactured them during vinyl's first 'heyday'. While a stylus endlessly circling in the lead-out groove is annoying and does subtract time from your stylus's life— time better spent by you listening, it's usually not dangerous.

The only time it can actually be bad for your cartridge is if you are playing an older, '50s era LP with a "violent" lead out groove designed to trip a clunky old record changer. Those records can give your cartridge a nasty workout that can include, in rare instances, time spent on the paper label and then back into the modulated groove area, though if you've ever experienced that, it's usually as effective a wake-up call as an alarm clock.

In a review of Sota's Moonbeam turntable, we covered the inexpensive QUP automatic arm lifter. It's an undamped, lightweight $50 plastic device that works reasonably well and is certainly appropriate to use in a moderately priced rig but if you've got thousands invested in a cartridge you might consider the $249 "Little Fwend" made in Scandinavia.

This is beautifully machined item available in three sizes (two are in the distribution chain, one as special order directly from Little Fwend. Despite the available variety there's no guarantee one will fit on your turntable, mostly because of distance between platter and arm base. For that reason Little Fwend offers an online list of known compatible turntables.

The lift cylinder is smooth-operating and well-damped, which results in a gentle rise, free of bouncing or "violent upheavals" as the arm rises, regarding of its mass or tracking force. Little Fwend provides excellent set-up instructions and includes both magnetic and adhesive ways to fix the base to your turntable.

The Little Fwend is packaged and presented as thoughtfully as it is manufactured. In the embedded video you will see a situation where it just barely fits between the under review EAT B Sharp turntable's platter and arm base. You'll also see that the rubber topped lifter contacts a screw instead of the arm itself. Not a problem but the point is, compatibility should be considered before you purchase one. Another issue in this particular install is that the "antenna" that the arm contacts is very close to the platter, which makes putting the record on the platter a bit tricky.

In this situation adding a Little Fwend may not be worth the inconvenience, but that of course is your choice. Where the Little Fwend is more compatible, it's a well worthwhile accessory especially if you are prone to dozing off before a record ends! As you'll see in the video, the Little Fwend is a smooth operator. If you own a premium rig, you'll appreciate the machine and plating quality too.

In America Little Fwend is available from Music Direct and perhaps from others as well. It's an easy product to recommend for its thoughtful packaging, excellent instructions, high quality construction and especially for how gently and reliably it does its job.

COMMENTS
Johnch's picture

I replaced a Q-Up with a Little Fwend on my VPI Classic Signature. It doesn't perform it's job any better than the vastly cheaper Q-Up, but it does that job in a far more refined manner and doesn't look like a cheap add-on when it's in place. The Q-Up's loud 'clack' sound when it engaged always made me cringe a bit, whereas the Little Fwend is completely silent in operation. No regrets.

analogdw's picture

I also replaced a Q-UP with one of these, on my VPI Prime. It has worked seamlessly for over a year now.

Note that VPI has now released their own version, called the Tru-Lift. I haven't tried it, but it is well reviewed on the VPI forum. People may want to consider this one too.

https://www.musicdirect.com/accessories/VPI-Tru-Lift-Tonearm-Lifter

ebuzz's picture

Always works fine for me and don't have an issue with a slight bump when it rises. How would that damage the cartridge? $500 buys a lot of records!

jon9091's picture

I have this on my VPI Classic. I like the smooth lift and high quality looks. It’s magnetic bottom sticks right to the Classic plinth without having to use the sticky backing.

RH's picture

This looks like a nifty device but I wondered "how is it powered?"
I couldn't find any mention of this in the review, nor on the website.

Then I looked at the video again and realized I must have been fooled by a sound on the video. Just when the fwend lifts up the tonearm the first time a motor sound begins on the video, so I presumed that was the sound of the fwend motor lifting. I guess it was just a coincidence caught on the video and the fwend isn't powered?

analogdw's picture

Just a coincidence. It’s not powered. Presumably it’s on a spring on a catch or something similar.

WaltonGoggins's picture
WaltonGoggins's picture
Aprilia69's picture

So I bought a Little Fwend for my original VPI Prime and much to my dismay, it needed to be stuck on to the plinth with a peel and stick adhesive. I recently upgraded my Prime to the Rosewood Prime Signature edition and there was no way I was sticking anything to the piece of art that is the rosewood plinth. But after a night of listening to LP's and drinking perhaps one too many glasses of wine, I woke up the following morning to the sounds of my SoundSmith Paua cartridge grinding away at the end of MOFI's Bill Evans Ultra-Disc reissue (absolutely stunning, BTW). Bummer! Until now:
http://www.elusivedisc.com/VPI-Tru-Lift-Automatic-Tonearm-Lift-For-VPI-P...
Voila, a tone arm lifter made by Integrity for VPI that is sufficiently weighted to hold itself in place, no adhesive necessary. Works beautifully, and your plinth will thank you for it!

Jazzwallah's picture

I checked the price of this gadget and I think I will continue to lift the tone arm manually.

X